Laidumo transmiteris Thermo Scientific Alpha COND2000

Atgal į: pH/ORP/COND/DO/TDS transmiteriai

Laidumo transmiteris Thermo Scientific Alpha COND2000

1/2 DIN montuojamas ant sienos ; Matuoja: laidumą/°C ; Matavimo ribos nuo 0.00 iki 1000 mS/cm

Pasiteirauti apie prekę

Gamintojas:

Aprašymas

Applications:

General: Use for virtually any batch or online applications where rapid, accurate control. Great for OEM/system integrator.

Industrial: Use in applications involving agriculture, chemical processing, boiler and water heaters, wafer-fab, microprocessor manufacturing, pharmaceuticals, pulp and paper industries, and bleach manufacturing.

Water Purification/Treatment: Use to treat batches of incoming process water, ultrapure water, boiler and feed water control.

Regulatory: Hook to recorder to document data for regulatory compliance.

Specifications:

Product Specification	Description
Conductivity
Range	... to 2.000 µS/cm ; ... to 20.00 µS/cm ; ... to 200.0 µS/cm ; ... to 2000 µS/cm ; ... to 20.00 mS/cm ; ... to 200.0 mS/cm ; ... to 1000 mS/cm
Resolution	0.001 µS/cm ; 0.01 µS/cm ; 0.1 µS/cm ; 1 µS/cm ; 0.01 mS/cm ; 0.1 mS/cm ; 1 mS/cm
Accuracy	±1 % of full scale reading (±2 % >500 mS/cm)
Temperature
Range	-10.0 to 125.0 ?C (14.0 to 257.0 ?F)
Resolution	0.1 ?C / 0.1 ?F
Accuracy	±0.5 ?C / ±1.0 ?F
Sensor	Pt100/Pt1000 (jumper selectable); 2 or 3 wire
Compensation	Auto/manual (normalized at 25 ?C)
Set Point And Controller Functions
Set Point 1 (SP1) / Set Point 2 (SP2)	... to 2.000 µS/cm or ... to 20.00 µS/cm or ... to 200.0 µS/cm or ... to 2000 µS/cm or ... to 20.00 mS/cm or ... to 200.0 mS/cm or ... to 1000 mS/cm
Switching Conductivity Hysteresis	0 to 10 % of full scale
Function (Switchable)	P/PI control (pulse length/pulse frequency/proportional integral); limit control; off
Adjustable Period With Pulse Length Controller	0.5 to 20 sec
Adjustable Period With Pulse Frequency Controller	60 to 120 pulse/min
Integral Action Time (IAT)	0 to 999.9 min
Pickup/Dropout Delay	0 to 2000 sec
Wash Cycle	0.1 to 200.0 hr
Wash Duration	1 to 2000 sec
Contact Outputs	1 SPDT, 3 SPST relays
Switching Voltage/ Current/Power	1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA 1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
Alarm Functions
Function (Switchable)	Steady or fleet (pulse)
Pickup Delay	0 to 2000 sec
Switching Voltage/ Current/Power	1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA 1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
Electrical Data & Connections:
Transmitter Function	Two 0/4 to 20 mA scalable outputs for Conductivity and temperature, galvanically isolated
CU 22 Function	22 mA current output
Isolated Output Voltage	12 V ±0.5 V (max. 50 mA)
Hold Function Switch	To freeze output current and deactivate control relays
Load	Max. 600 Ohm
Conductivity Input	2-cell/4-cell terminal
Connection Terminal	5-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks (For TSCONCTP2000W)	5-pin, 9-pin & 19-pin terminal, detachable blocks (For TSCONCTP2000P)
Display
LCD	UV coat, backlit 14 segments display with symbols for status information
Backlight	On/off selectable with four level of brightness control
Power Supply
Input	80 to 250 VAC/DC ; 50/60 Hz ; 10 VA
Main Fuse	315 mA, anti-surge, 250 V
Pollution Degree	2
Transient Overvoltage Category	II
EMC Specifications
Emitted Interference	According to EN 61326
Immunity To Interference	According to EN 61326
Environmental Conditions
Operating Temperature Range	0 to 40 ?C
Max. Relative Humidity	80 % up to 31 ?C decreasing linearly to 50 % at 40 ?C
Mechanical Specifications
Dimensions (WxHxD)	144 x 144 x 110 mm (For TSCONCTP2000W)	96 x 96 x 175 mm (For TSCONCTP2000P)
Weight	745 g (unit) / 1100 g (packed) (For TSCONCTP2000W)	550 g (unit) / 950 g (packed) (For TSCONCTP2000P)
Ingress Protection	IP66 (NEMA 4X) (For TSCONCTP2000W)	IP54 (front panel) (For TSCONCTP2000P)

Daugiau >